MPC8560 - Freescale Semiconductor MPC8560 PowerQUICC III Processor PMC with up to...
- Part Number:
- MPC8560
- Model Number:
- MPC8560
- Make:
- FREESCALE SEMICONDUCTOR
- Lead Time:
- Available
- Qty In Stock:
- Available
Freescale Semiconductor MPC8560 PowerQUICC III Processor PMC with up to 8 E1/T1/J1 interfaces. 667 MHz–1 GHz | 1x 32/64-bit PCI | Integrated Communications Processors Simple Type: Processor
The MPC8560 integrates a PowerPC processor core built on Power Architecture technology with system logic required for networking, telecommunications, and wireless infrastructure applications. The MPC8560 is a member of the PowerQUICC III family of devices that combine system-level support for industry-standard interfaces with processors that implement the embedded category of the Power Architecture technology. The PowerQUICC III is a versatile integrated communications processor designed for a variety of compute-intensive applications, excelling particularly in communications and networking products. Freescale’s PowerQUICC III processor family is the next generation of Freescale’s industryleading PowerQUICC line of integrated communications processors. PowerQUICC III processors provide higher performance in all areas of device operation, including greater flexibility, extended capabilities and higher integration.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 256 Kbyte L2 cache/SRAM
- Address translation and mapping unit (ATMU)
- Boot sequencer
- DDR memory controller
- High-performance RISC CPM operating at up to 333 MHz
- High-performance, 32-bit Book E–enhanced core that implements the Power Architecture
- Local bus controller (LBC)
- Programmable interrupt controller (PIC)
- Rapid IO interface unit | RapidIO–compliant message unit
- Two three-speed (10/100/1Gb) Ethernet controllers (TSECs)
Specifications
- Development Mezzanine Card: Optional plug-on card (side 2) to speed development EIA-232 debug serial port with cable to DB-9 connector JTAG header for PLD programmingJTAG/COP header for software development Four software-readable configuration jumpers 32-pin PLCC 8-bit socket for software development 2 user-programmable LEDs Single connector attached to PTMC module
- Ethernet: RMII through P13 connector 10/100/1000 BaseT Ethrenet with front panel access
- Memory: Up to 512 Mbytes Double Data Rate SDRAM Up to 32 Mbytes Flash memory Flash Architecture NOR
- Operating System Support: Linux Support Package (LSP) for Monta Visa Carrier Grade Edition (CGE) 3.1
- Optional Rear Transition Module: cPCI/cPSB (PICMG 2.16) formfactor Supports up to 2 Pm8560 modules on a cPCI/cPSB baseboard (such as the Emerson Katana750 or Katana 752i) 8 RJ-45 connectors supporting 8 E1/T1/J1 ports from a single Pm8560 or 8 RJ-45 connectors supporting 16 E1/T1/J1 ports from 2 Pm8560 modules (requires breakout cables) 100 ohms T1/J1 balanced interface 120 ohms E1 balanced interface T1/E1/J1 transformers with isolation and surge protection for every signal RJ-45 connectors supporting console/debug ports from each Pm8560 module ATCA formfactor Supports up to 4 Pm8560 modules on an ATCA baseboard (Such as the Emerson KatanaQp) Support for up to 32 E1/T1/J1 ports with 4 Pm8560s. TTIP TRING, RTIP and RRING are routed from Zone 3 connector through transformers and surge protection out of the rear I/O faceplate 100 ohms T1/J1 balanced interface 120 ohms E1 balanced interface T1/E1/J1 transformers with isolation and surge protection for every signal Micro-D connectors support serial I/O from P
- Other: EIA-232 serial console port accessible via front panel or P14 connector
- Physical Characteristics: -Board Format Length:149.0 mm (5.87") Width: 74.0 mm (2.91") Baseboard and module fit in a single cPCI/cPSB or ATCA slot Power requirements: +3 & +5 VDC @ 11.5W typical Operating Range: 0 to 55C, 5-95% relative humidity (non-condensing) -Specifications IEEE 1386.1 CMC/PMC VITA 32 ProcessorPMC
- Processor: Free scale PowerQUICC III MPC8560 800 MHz PowerPC Book E core operation 266MHz when core is 800MHz RISC-based Communications Processor Module (CPM) -Communications Functions PCI bus interface Ethernet controller UART controller using SCC TDM ports for eight T1/E1/J1 spans using MCC ATM support via Inverse Multiplexing for ATM (IMA) -System Functions DDR SDRAM controller General purpose I/O (GPIO) DMA I2C controller
- Protocol Support: Optional Spider SS7 layers MTP1, MTP2 and MTP3, and SpiderSIGTRAN M2UA, M3UA and SCTP (professional services may be required for porting/configuration)
- PTMC: Subset of PTMC Configuration 2 Serial Tx/Rx RMII RMII PHY Management I/F CT bus clocks
- Regulatory Compliance: FCC Part 15 (US) ICES-003 (Canada) IEC/UL/CSA 60950 NEBs: Telecordia EN55022 EN55024 EN300386
- T1/E1/J1: Up to 8 channelized E1 or T1/J1 spans Supports TI/CEPT and other user-defined protocols (customer provided software may be required) Automatically performs efficient packing Rear (PMC P14) E1/T1/J1 I/O Optional cPCI/2.16/cPSB or ATCA transition module available for rear I/O applications supporting 16 ports per system blade Surge protection for E1/T1/J1 ports on passive transition module
Applications
- DSLAMs
- Ethernet switches
- IP networking
- IP Virtual Private Networks (VPN)
- LAN-to-WAN router
- Media gateways
- Multi-service access platforms
- OC-3 line card
- Optical networking
- Regional office routers
- Remote access concentrators/servers
- SONET transmission controller
- T1/E1 and T3/E3 line cards
- Telecommunications switching and transmission equipment
- Wireless infrastructure equipment
Aliases
- None Available
Related Items
MPC8541E
Freescale Semiconductor MPC8541E Integrated Communications Processor. PowerQUICC III Processor Family
MPC5534MVZ80
MPC5534MVZ80- MPC8280CVVQLDA-ND
Freescale Semiconductor MPC8280CVVQLDA-ND IC MPU POWERQUICC II 480-TBGA - 333MHz - MPC8560VT833LC-ND
Freescale Semiconductor MPC8560VT833LC-ND IC MPU PWRQUICC III 783-FCPBGA - 833MHz